◆ Before you begin your diagnosis
Check the following two events that may occur by running diagnostics and take preliminary action if necessary.
Changes occur in the dataThe data of the target system may change.
Therefore, we recommend that you back up your system and data in advance.
Large amounts of data are registered and emailed.
Depending on the functionality of the target web site, a large amount of data may be registered
in the target system when the scan is conducted. In addition, in the case of inquiry functions that
involve sending e-mail, etc., please contact the person in charge of receiving e-mail or the server
administrator in advance, as a large volume of e-mail may be sent. Please consider excluding the
diagnosis from the scope of the study if it will have an impact.
※We have prepared a "Medical Questionnaire" that outlines the items to be checked in advance of
conducting the diagnosis, as described above.
Please download the file from the link below and use it.
◆ Diagnostic Steps
◆ Procedure Details
1. Set runtime options
Scan List > New Scan > 「Site/Scan Basic Info.」, set the following
Basic Scan Options > Scan SpeedSelect "Slow" to reduce the load.
Basic Scan Options > Safe ModeBy checking the "Enable" checkbox, you can expect the following functions to be suppressed
－Page before login：Inquiry、Posting on bulletin boards, etc.
－Page after login：Deletion, etc.
Crawl / scan target setting
You can set the screens you want to exclude from the crawl/scan.
For more information, please refer to the FAQ below.
2. Start crawl only
Scan Details > Status "▶Wait" > "Crawl/Scan", Select "Crawl Only" and click "Start".
By performing only a crawl, it is possible to re-scrutinize the screens to be excluded from the diagnosis
before the scan is performed (step 3.).
3. Scrutinize the screens that are excluded from the diagnosis（After crawl and before scan）
After the tour is completed, screen transition diagrams are checked and re-examined to determine
if there are any screens that should be excluded from the diagnosis.
Please refer to the FAQ below for the procedure to disqualify.
4. Check speed settings and start scanning
Scan Details > Status "▶Crawled" > "Crawl/Scan", Make sure "Crawl/Scan Speed" is set to "Slow",
then click "Start".