In order to reduce the load on the target site and unintended data changes, please consider the following settings when scanning.
・Scanning at a "Slow" speed
To reduce the server load caused by scanning, please scan at a "Slow" scan speed.
This can be set from Scan List > New Scan > Basic Scan Options > Scan Speed.
(If you set the scan speed to "Slow," you will get approximately 10 requests per second.)
・Set the scan type to "No login required" or "Up to login execution".
Narrowing the scope of the scan can reduce the impact on the site.
This can be set from Scan List > New Scan > Basic Scan Options > Scan Type.
・Use Safe Mode
When safe mode is enabled, crawling of functions such as "Inquiry" and "Posting on bulletin boards" will be suppressed on the pre-login screen, and crawling of functions such as "Delete" will be suppressed on the post-login screen.
This can be set from Scan List > New Scan > Basic Scan Options > Safe Mode.
・Configure crawl/scan target settings
By configuring the scan target settings, you can set only certain screens or paths to be scanned, or exclude certain screens or paths from being scanned.
Please refer to the following for detailed instructions on how to configure crawl/scan settings.
・Use manual crawls.
By using the manual crawl, only the screens that have been crawled manually can be included in the diagnosis.
Please refer to the following for details on how to use the manual crawl.